• Cart
  • Checkout
  • My Account

Infrared Conversions, IR Modifications & Photography Tutorials | Life Pixel IR

The world leader in infrared conversions, modifications & DIY IR conversion tutorials. Scratched sensor replacement, UV & Full spectrum conversions.

The world leader in infrared camera conversions

866.610.1710
  • Home
  • → Start Here ←
    • 1 – Introduction
    • 2 – Filter Choices
    • 3 – Focus Calibration
    • 4 – Lens Considerations
    • 5 – Camera Considerations
    • 6 – Start Shopping
  • Galleries
    • Infrared Photography
    • Infrared Time Lapse
    • Infrared Cinematography
    • Infrared Stop Motion
    • Ultraviolet Photography
    • Forensic Photography
  • Education
    • Training Sessions
    • How To Shoot Infrared
    • AR Coated Infrared Filters
    • Lens Hot Spot Database
    • Photoshop Video Tutorials
    • Infrared Issues & Solutions
    • IR Basics in Photoshop
    • Camera Quick Start Guide
    • DIY Conversion Tutorials
    • IR Photography Primer
    • Secondhand Cameras
    • Wall Of Shame
  • Workshops
  • FAQ
  • Blog
    • Tutorials
    • Inspiration
    • Locations
    • Gear
    • News
    • Other
  • Why Choose LifePixel?
    • Submit Your Review
  • Contact
  • Shop

Infrared Photoshop Tutorials & Videos

Share
Pin
Tweet
Email
Share
235 Shares

 

What we do

A short explainer video on what we do to convert your camera.


Filter selection guide

Helps you decide on which filter you would like to convert with by showing you what you can do in Photoshop.


 

Infrared film glow

Explains how simple it is to mimic the glow of infrared film in digital IR photos using Photoshop


Adding texture to IR images

Shows you an easy way of adding texture to Infrared images


Infrared RAW file white balance issues & solutions

This video explains that Adobe Photoshop and Lightroom cannot properly interpret IR RAW files. Shows how to use Nikon Capture NX2 and Canon Digital Photo Professional instead. Also explains how some Nikon IR cameras cannot properly set a white balance in camera, working in RAW with NX2 is the best alternative method for proper IR WB. Download Zip file of 3 image files from a Nikon D5000: IR RAW with WB set | IR RAW without WB | IR JPEG with WB set


 

Editing Infrared Photos with a DNG Profile Editor, Lightroom, and Photoshop


 

Setting White Balance on Infrared Images with Lightroom (DNG Profile Editor)


Win a FREE Camera Conversion!


 

Importance of setting the custom/preset white balance

Shows the huge difference a simple custom white balance setting can make in your IR images


 

How to swap color channels in Standard IR Filter infrared images to get the blue sky effect

Explains the blue sky channel swap technique for Standard Color IR Filter images.


 

How to swap color channels in Enhanced IR Filter infrared images

Explains the blue sky channel swap technique for Enhanced Color IR Filter images.


 

How to correct off-color highlights in color infrared images

Shows how to remove highlight color casts that sometimes occur in color IR photos


 

How to swap color channels in Super Color IR Filter infrared images

Explains the blue sky channel swap technique for Super Color IR Filter images.


 

How to make independent adjustments for color and black & white infrared images

A more detailed tutorial on adjusting color IR photos and controlled B&W IR conversion method

  • Latest Articles
  • Author Bio
Vitaly Druchinin

Latest articles by Vitaly Druchinin (see all articles)

  • Life Pixel IR Learning Series Preview - September 22, 2016
  • Secondhand Camera Buying Guide - January 26, 2016
  • Variable Infrared Filters - January 23, 2016
Vitaly Druchinin

Vitaly Druchinin


See All Articles by Vitaly Druchinin
Share
Pin
Tweet
Email
Share
235 Shares
Share
Pin
Tweet
Email
Share
235 Shares

Related Posts

  • Basic Infrared Photoshop Techniques Tutorial
    Basic Infrared Photoshop Techniques Tutorial
  • Life Pixel Modified Camera Quick Start Guide
    Life Pixel Modified Camera Quick Start Guide
  • The Wall Of Shame
    The Wall Of Shame
  • Getting started basics – White balance and Shooting RAW
    Getting started basics – White balance and Shooting RAW

Filed Under: Tutorials

Comments

  1. Bernard Tuvlin says

    September 28, 2022 at 2:50 pm

    I am shooting with a Fuji converted XE1. Not sure if I will Use Raw or Jpeg. What software would you suggest.? The camera had a full spectrum conversion.

    Reply
    • Dan Wampler says

      September 28, 2022 at 6:37 pm

      Hi there, I would suggest shooting in RAW and downloading the RAW editor for your camera, Capture one Express for Fujifilm. That will make setting a proper white balance easier

      Reply
  2. Scott Ditzel says

    March 2, 2021 at 1:28 pm

    Just a question. I used to use a Hoya R72 filter on my Nikon D70s and was able to capture IR images with a fairly fast shutter speed. That said, I had to compose with the camera on a tripod and the filter off. I always thought that CCD sensors passed more IR than CMOS sensors. Is that correct?

    Reply
    • Daniel Malkin says

      March 17, 2021 at 1:50 pm

      Hi Scott,

      When using an external IR filter on an unconverted camera, the biggest variable is how well the OEM filter works at blocking out IR. If you can get a fairly fast exposure using the R72 or similar, then this indicates that the original filter on the sensor allows sufficient IR lighting to bleed through.

      A camera converted to IR is going to be very sensitive to IR for both CCD and CMOS sensors.

      Reply
  3. Gabriel says

    April 6, 2020 at 1:09 pm

    I have a Nikon D70 that has been converted using a standard IR filter I believe. All my images turn out red, and the video said to take a picture of foliage to set that as the preset white balance but that still doesn’t work. Is there a certain white balance I should use when I take a photo of the foliage to get the less red result?

    Reply
    • Dan Wampler says

      April 6, 2020 at 7:45 pm

      Gabriel,
      You may find this article useful. https://www.lifepixel.com/photo-tutorials/master-white-balance

      Reply
    • Dr Francis Greaves says

      April 7, 2020 at 5:54 am

      @Gabriel, I have a Nikon D100 and found out that I got a better white balance setting up a Custom White Balance as per the manual using a Neutral Grey. In my case, living in the far south west of Ireland, a nice plain medium/light grey slab of rock in the sunshine worked well.

      Reply
    • Dr Francis Greaves says

      April 7, 2020 at 6:05 am

      @Gabriel I also do recommend Dan’s link above which explains it all very well

      Reply
  4. Andrew Noyes says

    June 17, 2019 at 8:44 pm

    I’ve been reading through this blog extensively and there is a lot of great info here! I’m looking for specific information on Hydrogen Alpha Wavelength Sensitivity Conversions. Everything I’ve read, and I may have missed it, I haven’t been able to find anything on this specific conversion. I see stuff on IR conversions and Full spectrum conversion, different filter types but nothing on the H Alpha conversion. Am I missing it?

    Reply
    • Daniel Malkin says

      June 26, 2019 at 1:37 pm

      Hi Andrew,

      Our H-alpha conversion passes from 400-700nm at almost 100%. Also, we have the transmission curve for this filter in any of the links below.

      https://www.lifepixel.com/product-category/our-services/h-alpha-camera-conversion

      Reply
      • Andrew Noyes says

        June 26, 2019 at 2:08 pm

        Thanks for the response Daniel! I guess I was hoping to find some images taken with the camera to compare it to other mods. Much like whats going on in the Filter Selection Guide.

        Reply
  5. mattmega4 says

    August 31, 2018 at 9:09 pm

    Hello,

    I cannot find Adobe Lab’s DNG Profile editor on their website. Is this still the software required?

    Reply
    • Daniel Malkin says

      September 4, 2018 at 3:16 pm

      For a pc or a mac?

      Reply
      • david palmer says

        August 20, 2021 at 10:53 am

        I’m having the same problem finding the dng profile editor – I have a MAC and am running Catalina and ps2021and bridge 2021

        Reply
  6. l04316 says

    May 17, 2018 at 8:40 pm

    The videos use photoshop but don’t say what version. I have Photoshop 7.0, will
    I be able to do what the videos show here?

    Reply
    • Daniel Malkin says

      May 24, 2018 at 10:46 am

      Your version of Photoshop should allow for most of what we show. I think we used an older version too, CS3 I believe.

      Reply
  7. dane.wilson0454 says

    May 8, 2018 at 9:19 am

    I am using a Mac High Sierra 10.13.4 and camera is a Nikon D7100 which is in the process of being switched over to infrared. I contacted Nikon and they no longer support Capture NX 2 and I can’t download the Canon Digital Photo Professional as I shoot with a Nikon. Do you have any suggestions for processing the infrared photos. I have downloaded the Nikon NX D but the reviews are not very favorable for this program.

    Thank-you

    Dane Wilson

    Reply
    • Dan Wampler says

      May 8, 2018 at 10:49 am

      Hi Dane, I suggest using Capture NX-D; it is a free download. Good Luck!

      Reply
      • Francis Greaves says

        August 26, 2018 at 9:17 am

        I have downloaded the Capture NX-D from https://downloadcenter.nikonimglib.com/en/download/sw/112.html you are correct it is free.
        You are also correct when you told me how much more detail you get in an image just by putting it through the Nikon Software.
        Amazing!!
        Thanks a million, Dan.
        Francis

        Reply
  8. David Reade says

    February 9, 2018 at 2:46 pm

    The “Adding Texture” video is not working.

    Reply
    • Noah Ashurov says

      February 9, 2018 at 5:29 pm

      Hi David,

      It’s working for me!

      Reply
  9. Ali Zandi says

    January 23, 2018 at 7:01 pm

    Wow. I am completely blown away by the fact that I’ve been missing out on the supercolor filter’s true potential shooting IR Nikon RAW files. So glad I came to visit this page. The “Infrared RAW file white balance issues & solutions” was huge for me. I’ve been missing out on the color information for almost a year, forcing me to work really hard with multiple programs to get the color separation with my super color filter! As a Nikon IR shooter, Capture NX-2 is worth every penny if you must shoot RAW and want the amazing colors. Thank you guys so much. Super helpful!!

    Reply
  10. Judy Guglielemencci says

    October 2, 2017 at 4:06 pm

    I am looking to convert my Nikon D-70 to Infer red. I have used infer red film in film cameras, and had to use a filter on the front of the camera to achieve the effect I was looking for. Is a filter required on the front of a DSLR that has been converted to IR?
    I also need a price as to what it will cost to do the conversion on my D-70.
    Thank you for your time
    Judy

    Reply
    • Noah Ashurov says

      October 3, 2017 at 1:20 am

      Hey Judy,

      We can definitely convert your D70 to IR. You will not need to use an external filter on your lens. The price is $275 for most crop-sensor DSLRs, here is the link where you can find more information.

      Reply
  11. William M says

    May 5, 2017 at 7:46 am

    Now that it is May 2017 here in the present what other editing software works well with IR from purchased to freeware as apposed to photoshop?

    Reply
    • Noah Ashurov says

      May 8, 2017 at 1:10 am

      Hey William,

      Photoshop is still the most popular editing software so all of these tutorials are still helpful and insightful. For RAW processing, you are still limited to the manufacturers RAW converter or creating a DNG profile through Adobe.
      If the software you enjoy using has a channel mixer, you can do the channel swap on there as well. What specific software do you have in mind?

      Reply
    • Jack Coleman says

      June 1, 2017 at 2:30 pm

      GIMP works well. Plus, there is an excellent red/blue channel swap video tutorial on YouTube

      Reply
  12. George says

    February 27, 2017 at 8:31 pm

    Appreciating the time and effort that goes into making the tutorials, I’d suggest beginning to update them using later Photoshop editions than those used here. Just sayin’. (Me, hated to go for the cloud(ed) version, but there are too many worthwhile tools there to ignore.)

    Reply
  13. Ant Vaughan says

    February 18, 2017 at 3:06 pm

    I had a Nikon D7000 converted to super colour? Primarily I will be using it to shoot studio and location nude’s. How would I set the white balance…everything points to grass & foliage…what do you use for skin with strobes? Have you any tutorials for such a pracrice?

    Reply
    • Vitaly Druchinin says

      March 4, 2017 at 9:53 am

      Hello Ant, Thank you for your comment. For infrared people photography on location you could still white balance on foliage . In a studio setting for nude model infrared photography it would make sense to use a grey card as your IR white balance target. Dan Wampler, our instructor has a lot of experience photographing infrared models on location and indoors. You may consider scheduling an online training session with him and he’d be able to answer just about any question you have when it comes to photographing infrared images, landscape and humans alike.

      Reply
  14. John says

    November 22, 2016 at 11:40 am

    Great videos and very informative. I have ordered the conversion of a Sony AR7Mk2 with a Super Color Filter. I am still curious about the raw file white balance problem and the need to run the file through proprietary software before using Lightroom or Photoshop. I was told to use Capture One for the Sony ARW files, but this might be old info. I note that in many of the above videos your are demonstrating with Lightroom / Photoshop 3 or 5. Does this issue still exist with the Creative Cloud versions (6 I think)? Is using the Adobe DHG Profile Editor easier than Capture One or Play Memories? John Howard j.how@me.com

    Reply
    • Daniel Malkin says

      December 27, 2016 at 3:01 pm

      Hi John, All of our videos are using JPEGs that have already been converted from RAW files so the embedded custom white balance is in the file. Each manufacture has their own proprietary RAW conversion software so if you are going to shoot in RAW, then you will want to use Sony’s Capture One. If you do not want to do this, then the alternative is to create a DNG profile as shown in the two videos below that have DNG in the title.

      https://www.lifepixel.com/photo-tutorials/infrared-photoshop-videos

      Reply

Comments

  1. Bernard Tuvlin says

    September 28, 2022 at 2:50 pm

    I am shooting with a Fuji converted XE1. Not sure if I will Use Raw or Jpeg. What software would you suggest.? The camera had a full spectrum conversion.

    Reply
    • Dan Wampler says

      September 28, 2022 at 6:37 pm

      Hi there, I would suggest shooting in RAW and downloading the RAW editor for your camera, Capture one Express for Fujifilm. That will make setting a proper white balance easier

      Reply
  2. Scott Ditzel says

    March 2, 2021 at 1:28 pm

    Just a question. I used to use a Hoya R72 filter on my Nikon D70s and was able to capture IR images with a fairly fast shutter speed. That said, I had to compose with the camera on a tripod and the filter off. I always thought that CCD sensors passed more IR than CMOS sensors. Is that correct?

    Reply
    • Daniel Malkin says

      March 17, 2021 at 1:50 pm

      Hi Scott,

      When using an external IR filter on an unconverted camera, the biggest variable is how well the OEM filter works at blocking out IR. If you can get a fairly fast exposure using the R72 or similar, then this indicates that the original filter on the sensor allows sufficient IR lighting to bleed through.

      A camera converted to IR is going to be very sensitive to IR for both CCD and CMOS sensors.

      Reply
  3. Gabriel says

    April 6, 2020 at 1:09 pm

    I have a Nikon D70 that has been converted using a standard IR filter I believe. All my images turn out red, and the video said to take a picture of foliage to set that as the preset white balance but that still doesn’t work. Is there a certain white balance I should use when I take a photo of the foliage to get the less red result?

    Reply
    • Dan Wampler says

      April 6, 2020 at 7:45 pm

      Gabriel,
      You may find this article useful. https://www.lifepixel.com/photo-tutorials/master-white-balance

      Reply
    • Dr Francis Greaves says

      April 7, 2020 at 5:54 am

      @Gabriel, I have a Nikon D100 and found out that I got a better white balance setting up a Custom White Balance as per the manual using a Neutral Grey. In my case, living in the far south west of Ireland, a nice plain medium/light grey slab of rock in the sunshine worked well.

      Reply
    • Dr Francis Greaves says

      April 7, 2020 at 6:05 am

      @Gabriel I also do recommend Dan’s link above which explains it all very well

      Reply
  4. Andrew Noyes says

    June 17, 2019 at 8:44 pm

    I’ve been reading through this blog extensively and there is a lot of great info here! I’m looking for specific information on Hydrogen Alpha Wavelength Sensitivity Conversions. Everything I’ve read, and I may have missed it, I haven’t been able to find anything on this specific conversion. I see stuff on IR conversions and Full spectrum conversion, different filter types but nothing on the H Alpha conversion. Am I missing it?

    Reply
    • Daniel Malkin says

      June 26, 2019 at 1:37 pm

      Hi Andrew,

      Our H-alpha conversion passes from 400-700nm at almost 100%. Also, we have the transmission curve for this filter in any of the links below.

      https://www.lifepixel.com/product-category/our-services/h-alpha-camera-conversion

      Reply
      • Andrew Noyes says

        June 26, 2019 at 2:08 pm

        Thanks for the response Daniel! I guess I was hoping to find some images taken with the camera to compare it to other mods. Much like whats going on in the Filter Selection Guide.

        Reply
  5. mattmega4 says

    August 31, 2018 at 9:09 pm

    Hello,

    I cannot find Adobe Lab’s DNG Profile editor on their website. Is this still the software required?

    Reply
    • Daniel Malkin says

      September 4, 2018 at 3:16 pm

      For a pc or a mac?

      Reply
      • david palmer says

        August 20, 2021 at 10:53 am

        I’m having the same problem finding the dng profile editor – I have a MAC and am running Catalina and ps2021and bridge 2021

        Reply
  6. l04316 says

    May 17, 2018 at 8:40 pm

    The videos use photoshop but don’t say what version. I have Photoshop 7.0, will
    I be able to do what the videos show here?

    Reply
    • Daniel Malkin says

      May 24, 2018 at 10:46 am

      Your version of Photoshop should allow for most of what we show. I think we used an older version too, CS3 I believe.

      Reply
  7. dane.wilson0454 says

    May 8, 2018 at 9:19 am

    I am using a Mac High Sierra 10.13.4 and camera is a Nikon D7100 which is in the process of being switched over to infrared. I contacted Nikon and they no longer support Capture NX 2 and I can’t download the Canon Digital Photo Professional as I shoot with a Nikon. Do you have any suggestions for processing the infrared photos. I have downloaded the Nikon NX D but the reviews are not very favorable for this program.

    Thank-you

    Dane Wilson

    Reply
    • Dan Wampler says

      May 8, 2018 at 10:49 am

      Hi Dane, I suggest using Capture NX-D; it is a free download. Good Luck!

      Reply
      • Francis Greaves says

        August 26, 2018 at 9:17 am

        I have downloaded the Capture NX-D from https://downloadcenter.nikonimglib.com/en/download/sw/112.html you are correct it is free.
        You are also correct when you told me how much more detail you get in an image just by putting it through the Nikon Software.
        Amazing!!
        Thanks a million, Dan.
        Francis

        Reply
  8. David Reade says

    February 9, 2018 at 2:46 pm

    The “Adding Texture” video is not working.

    Reply
    • Noah Ashurov says

      February 9, 2018 at 5:29 pm

      Hi David,

      It’s working for me!

      Reply
  9. Ali Zandi says

    January 23, 2018 at 7:01 pm

    Wow. I am completely blown away by the fact that I’ve been missing out on the supercolor filter’s true potential shooting IR Nikon RAW files. So glad I came to visit this page. The “Infrared RAW file white balance issues & solutions” was huge for me. I’ve been missing out on the color information for almost a year, forcing me to work really hard with multiple programs to get the color separation with my super color filter! As a Nikon IR shooter, Capture NX-2 is worth every penny if you must shoot RAW and want the amazing colors. Thank you guys so much. Super helpful!!

    Reply
  10. Judy Guglielemencci says

    October 2, 2017 at 4:06 pm

    I am looking to convert my Nikon D-70 to Infer red. I have used infer red film in film cameras, and had to use a filter on the front of the camera to achieve the effect I was looking for. Is a filter required on the front of a DSLR that has been converted to IR?
    I also need a price as to what it will cost to do the conversion on my D-70.
    Thank you for your time
    Judy

    Reply
    • Noah Ashurov says

      October 3, 2017 at 1:20 am

      Hey Judy,

      We can definitely convert your D70 to IR. You will not need to use an external filter on your lens. The price is $275 for most crop-sensor DSLRs, here is the link where you can find more information.

      Reply
  11. William M says

    May 5, 2017 at 7:46 am

    Now that it is May 2017 here in the present what other editing software works well with IR from purchased to freeware as apposed to photoshop?

    Reply
    • Noah Ashurov says

      May 8, 2017 at 1:10 am

      Hey William,

      Photoshop is still the most popular editing software so all of these tutorials are still helpful and insightful. For RAW processing, you are still limited to the manufacturers RAW converter or creating a DNG profile through Adobe.
      If the software you enjoy using has a channel mixer, you can do the channel swap on there as well. What specific software do you have in mind?

      Reply
    • Jack Coleman says

      June 1, 2017 at 2:30 pm

      GIMP works well. Plus, there is an excellent red/blue channel swap video tutorial on YouTube

      Reply
  12. George says

    February 27, 2017 at 8:31 pm

    Appreciating the time and effort that goes into making the tutorials, I’d suggest beginning to update them using later Photoshop editions than those used here. Just sayin’. (Me, hated to go for the cloud(ed) version, but there are too many worthwhile tools there to ignore.)

    Reply
  13. Ant Vaughan says

    February 18, 2017 at 3:06 pm

    I had a Nikon D7000 converted to super colour? Primarily I will be using it to shoot studio and location nude’s. How would I set the white balance…everything points to grass & foliage…what do you use for skin with strobes? Have you any tutorials for such a pracrice?

    Reply
    • Vitaly Druchinin says

      March 4, 2017 at 9:53 am

      Hello Ant, Thank you for your comment. For infrared people photography on location you could still white balance on foliage . In a studio setting for nude model infrared photography it would make sense to use a grey card as your IR white balance target. Dan Wampler, our instructor has a lot of experience photographing infrared models on location and indoors. You may consider scheduling an online training session with him and he’d be able to answer just about any question you have when it comes to photographing infrared images, landscape and humans alike.

      Reply
  14. John says

    November 22, 2016 at 11:40 am

    Great videos and very informative. I have ordered the conversion of a Sony AR7Mk2 with a Super Color Filter. I am still curious about the raw file white balance problem and the need to run the file through proprietary software before using Lightroom or Photoshop. I was told to use Capture One for the Sony ARW files, but this might be old info. I note that in many of the above videos your are demonstrating with Lightroom / Photoshop 3 or 5. Does this issue still exist with the Creative Cloud versions (6 I think)? Is using the Adobe DHG Profile Editor easier than Capture One or Play Memories? John Howard j.how@me.com

    Reply
    • Daniel Malkin says

      December 27, 2016 at 3:01 pm

      Hi John, All of our videos are using JPEGs that have already been converted from RAW files so the embedded custom white balance is in the file. Each manufacture has their own proprietary RAW conversion software so if you are going to shoot in RAW, then you will want to use Sony’s Capture One. If you do not want to do this, then the alternative is to create a DNG profile as shown in the two videos below that have DNG in the title.

      https://www.lifepixel.com/photo-tutorials/infrared-photoshop-videos

      Reply

Leave a Reply Cancel reply

You have to agree to the comment policy.

Blog Topics

  • Tutorials
  • Inspiration
  • Locations
  • Gear
  • News
  • Other/Misc

What our customers say:

Life Pixel has been a life-changer for me. Continue reading
Eric GConnecticut
Read more reviews
I am more than satisfied with the service I received Continue reading
Christopher JCanada
Read more reviews
I am more than pleased with the conversion job that you did Continue reading
LOUIS MWaco, Texas
Read more reviews
I am VERY impressed with his knowledge of your products and his patience in explaining it to a novice like me. Continue reading
Lynn FEssex, Maryland
Read more reviews
Things will only get better from here thanks to all of you. Continue reading
Phillip FRedding, California
Read more reviews
The Lifepixel newsletter reminds me of not having expressed my gratitude for the excellent job you made. Continue reading
Michael GGermany
Read more reviews
Your staff went above and beyond the call of duty to make sure everything was handled in an excellent manner. Continue reading
Paige RPearland, Texas
Read more reviews
It has given my old camera a new life, I will enjoy using it again. Continue reading
William PAustralia
Read more reviews
Excellent service and the camera works just great Continue reading
Hans FairhurstAustralia
Read more reviews
I just got my converted camera back from you guys. THANK YOU!!!! Continue reading
Anne CutlerForest Knolls, CA
Read more reviews
infrared_filter_choices_sidebar
ir_conversions_explained_sidebar
----------- Watch More Videos -----------
infrared_quick_start_guide

Ready to start shooting Infrared?

Convert My Camera

Subscribe To Our Newsletter

Receive updates, tips, cool tutorials, free stuff and special discounts.

Learn the Basics

  • Video
  • Start Here
  • Filter Choices
  • Focus Calibration
  • Lens Considerations
  • Camera Considerations
  • Place Your Conversion Order

Resources

  • Galleries
  • Lens Hot Spot Database
  • IR Tutorials
  • FAQ
  • Infrared Filter Choices
  • Infrared Photography Guide
  • Infrared DIY Tutorials

Company

  • Why Choose Us
  • Get In Contact
  • Job Openings
  • Write For Us
  • Affiliate Program
  • Terms of Use
  • Privacy Policy
  • Home
  • Start Here
  • Galleries
  • Tutorials
  • FAQ
  • Blog
  • Why Choose LifePixel?
  • Shop
  • Contact

Copyright © 2023 Life Pixel Infrared - All rights reserved - LifePixel Infrared Photography IR Conversion, Modification & Scratched Sensor Repair