Disclaimer: This tutorial is intended for experienced professionals and made available to you for informational purposes only. Tampering with your camera will void your manufacturer’s warranty. If you decide to perform the conversion you could damage your camera or be hurt or get killed from the high voltage present – you do so at your own risk, we are not responsible for camera damage or any harm you may suffer or any special or consequential damages. Also, by visiting this site you are legally bound by our Terms of Use Agreement, we highly recommend you read it.
Focus Warning: Because of the complexity and requirement for specialized precision equipment, advanced training and experience, we do not provide any information regarding focus calibration whatsoever.
The mere act of removing the sensor from within the camera could potentially ruin the original factory calibration and render your camera completely incapable of achieving proper focus. If this happens we will be unable to help you and even the manufacturer may refuse to service your camera. This is very serious stuff folks.
Focus and dust are in fact the most difficult parts of the conversion process. We highly recommend you send your camera in for conversion instead of attempting to do this yourself.
You will need at least these tools & supplies to follow the Panasonic Lumix GH2 infrared conversion tutorial:
– Our custom glass infrared filter to replace the hotmirror
– Small philips type screwdriver
– Tweezers
– Canned air
– Lens cleaning solution & tissue
– Grounding strap /w current limit resistor
If you prefer not to risk damage to your camera, have us convert it to infrared for you. It would be best to perform the conversion in a well lit area that is as clean and dust free as possible. Wearing a grounding strap will minimize the chance of zapping your camera with static and most likely rendering it dead.

Panasonic Lumix GH2 infrared DIY tutorial step 1
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 2
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 3
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 4
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 5
Remove rubber eye piece.

Panasonic Lumix GH2 infrared DIY tutorial step 6
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 7
Carefully flip over the rear panel and unplug marked ribbon cables.

Panasonic Lumix GH2 infrared DIY tutorial step 8
Remove screws marked with blue arrows and disconnect the cables marked with red arrows.

Panasonic Lumix GH2 infrared DIY tutorial step 9
Disconnect marked cable.

Panasonic Lumix GH2 infrared DIY tutorial step 10
Flip over the PCB and disconnect the marked cables.

Panasonic Lumix GH2 infrared DIY tutorial step11
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 12
Lift out the marked metal part.

Panasonic Lumix GH2 infrared DIY tutorial step 13
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 14
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 15
Carefully separate the top assembly from the rest of the body and disconnect marked cables.

Panasonic Lumix GH2 infrared DIY tutorial step 16
Lift out the sensor assembly.

Panasonic Lumix GH2 infrared DIY tutorial step 17
Your camera should now be all in pieces.

Panasonic Lumix GH2 infrared DIY tutorial step 18
Remove marked screws.

Panasonic Lumix GH2 infrared DIY tutorial step 19
Separate the shutter unit from the sensor, remove screws marked with red arrows and remove the metal retainer springs marked with blue arrows.

Panasonic Lumix GH2 infrared DIY tutorial step 20
Remove the dust reduction filter.

Panasonic Lumix GH2 infrared DIY tutorial step 21
Remove the hot mirror retainer frame.

Panasonic Lumix GH2 infrared DIY tutorial step 22
Remove the hot mirror.

Panasonic Lumix GH2 infrared DIY tutorial step 23
Remove the rubber hot mirror grommet.

Panasonic Lumix GH2 infrared DIY tutorial step 24
Apply double sided self-adhesive filter seal.

Panasonic Lumix GH2 infrared DIY tutorial step 25
Insert the replacement infrared filter on top of the filter seal and press firmly to activate the pressure sensitive adhesive. Reassemble the shutter unit and sensor assembly (step 19) and follow the tutorial backwards from step 18 to reassemble the camera.